Skip to content

Connect OpenClaw to Attio

Connect OpenClaw to Attio in 3 steps: 1. Sign in to ApexGenius and connect Attio. 2. Add the ApexGenius MCP server. 3. Start using Attio in OpenClaw.

1,000 free credits · No card required

How to connect Attio to OpenClaw

  1. 1Sign in to ApexGenius and connect Attio
  2. 2Add the ApexGenius MCP server to OpenClaw
  3. 3Start using Attio in OpenClaw
  1. 1Attio

    Connect Attio to ApexGenius

    Connect Attio

    Attio opens its own sign-in. Sign in and allow ApexGenius.

  2. 2ApexGenius

    Connect ApexGenius to OpenClaw

    Copy the MCP address

    On Start, pick API key, open Manual setup, and copy the MCP address.

  3. 3ApexGenius

     

    Approve access

    ApexGenius opens its approval page. Review the access, then approve.

Add the ApexGenius MCP server to OpenClaw

OpenClaw saves outbound MCP servers under mcp.servers in its config. Add one from the terminal, or in the Control UI under Settings, then MCP.

  1. Run the command. To use the Control UI instead, open Settings, then MCP, then Add server, choose Streamable HTTP, enter the address, and set auth to oauth in the config editor on that page.
  2. Sign in. In Settings, then MCP, choose Sign in for apexgenius and approve ApexGenius in your browser.
  3. From a terminal instead, stop the Gateway, run openclaw mcp login apexgenius, follow the printed authorization URL, then start the Gateway again.
Run in your terminal
openclaw mcp add apexgenius \
  --url https://server.autom8.pro/mcp \
  --transport streamable-http \
  --auth oauth

Check it. Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. Saving a server does not prove it answers.

Steps follow OpenClaw documentation, Connect MCP servers (opens in a new tab), read November 12, 2026.

Then ask OpenClaw

Use whoami to show which Attio user and workspace are connected, then list the lists in my workspace. Do not change anything.

Start free
Written setup, step by stepShow

Before you start

  • An account with permission to use the Attio resources you intend to connect.

1. Connect Attio to ApexGenius

  1. Open Attio in Connections. Choose Connect, or Add connection when offered. Give the connection a name if prompted. If Gateway setup pending appears, contact ApexGenius support before continuing.
  2. Choose the account and review access. Sign in to Attio in the browser, choose the workspace, and allow access. Attio uses browser authorization; no API key is pasted into ApexGenius.
    The full Attio sign-in page that opens when you connect Attio, with a red box around the sign-in options.
    Connect opens Attio's sign-in. Sign in with Google or your work email, then allow ApexGenius.Open full-size image (opens in a new tab)
  3. Review the connected account and resources. Confirm the connected Attio user and workspace. Open Tools to review the record, list, note and task actions. Your Attio permissions set what the connection can reach.
  4. Check the connection. Use Test connection or Check again and read the reported status. Add an AI agent from the AI agents page, choose Read only for the first test, and try the question below.
Connect Attio →

2. Connect ApexGenius to OpenClaw

Use this server address when adding the connection:

https://server.autom8.pro/mcp

The steps are above, under Add the ApexGenius MCP server to OpenClaw. These notes apply to OpenClaw only.

  • Set the transport. When transport is left out, OpenClaw uses SSE. ApexGenius serves Streamable HTTP, so keep --transport streamable-http.
  • Browser on another machine. If the browser cannot reach the callback, copy the code it returns and run openclaw mcp login apexgenius --code with that code.
  • If sign-in is needed again. openclaw mcp status --verbose shows whether a server needs authorization. Until it is signed in, OpenClaw leaves that one server out of the agent’s tools instead of failing the turn.
  • Reloading. openclaw mcp reload refreshes only the current CLI process. A Gateway running elsewhere needs its own reload or restart.
  • Access. When ApexGenius asks what OpenClaw may use, choose Read only for the first test, or Custom to limit it to the tools you need.

3. Verify one safe read

Use whoami to show which Attio user and workspace are connected, then list the lists in my workspace. Do not change anything.

Use whoami to show which Attio user and workspace are connected, then list the lists in my workspace. Do not change anything.

Compare the returned account and resource with Attio. Check the connection status separately from the result of the first read.

Full guide: the Attio setup guide.

What it looks like in OpenClaw

Illustration of a task, not a recorded customer result. Your answers come from the account and dates you choose.

How the route works
OpenClaw
OpenClawApexGenius MCP route
Who am I in Attio, and which workspace is connected? Do not change anything.
ApexGenius
Working with ApexGenius1 tool search · 1 read
RequestCheck the account
Account scopeAuthorized connections checked
apex_search_toolsAttio workspace · Find the Attio read routeComplete
apex_call_read_toolwhoami · Read the connected userComplete
OpenClaw

Illustrative example: the connected user is Alex in the Northwind workspace. Compare this with the Attio account you authorized before reading records. Nothing was changed.

Read-only route
OpenClaw

What to ask OpenClaw about Attio

  • Check the account

    Who am I in Attio, and which workspace is connected? Do not change anything.

    Runs whoami (read).

  • Find contacts

    Find every contact at Acme in Attio and show their titles and emails.

    Runs search-records (read), then get-records-by-ids (read).

  • Pipeline by stage

    Count open deals by stage in Attio. Do not change anything.

    Runs list-attribute-definitions (read), then run-basic-report (read).

These 3 questions use 5 of Attio’s 41 operations. The full list is below.

  • Log a note on the Acme company record that sums up today's call. Show me the note first. (write)

What OpenClaw can do in Attio

41 operations: 26 read, 15 write. Read looks things up and changes nothing. Writes change Attio and run only when you turn them on.

Records and objects

5 read · 4 write
  • list-objectsread
  • search-recordsread
  • list-recordsread
  • get-records-by-idsread
  • list-attribute-definitionsread
  • create-recordwrite
  • upsert-recordwrite
  • update-recordwrite
  • merge-recordswrite

Lists and pipelines

3 read · 5 write
  • list-listsread
  • list-list-attribute-definitionsread
  • list-records-in-listread
  • create-listwrite
  • add-record-to-listwrite
  • update-listwrite
  • update-list-entry-by-idwrite
  • update-list-entry-by-record-idwrite

Notes

3 read · 2 write
  • search-notes-by-metadataread
  • semantic-search-notesread
  • get-note-bodyread
  • create-notewrite
  • update-notewrite

Tasks

1 read · 2 write
  • list-tasksread
  • create-taskwrite
  • update-taskwrite

Comments

2 read · 2 write
  • list-commentsread
  • list-comment-repliesread
  • create-commentwrite
  • delete-commentwrite

Meetings and calls

4 read
  • search-meetingsread
  • search-call-recordings-by-metadataread
  • semantic-search-call-recordingsread
  • get-call-recordingread

Emails

3 read
  • search-emails-by-metadataread
  • semantic-search-emailsread
  • get-email-contentread

Workspace

3 read
  • whoamiread
  • list-workspace-membersread
  • list-workspace-teamsread

Reports and SQL

2 read
  • run-basic-reportread
  • query-particle-sqlread

You choose the access. When you approve OpenClaw, pick Full access, Read only, or Custom.

The connection acts as the Attio user who signed in. Attio permissions set what it can reach; ApexGenius does not add a record-level allowlist.

The read route checks Attio's live tool labels and rejects writes or unlabeled operations.

Writes run immediately. Blocked hides a tool from agents.

Merges and deleted comments cannot be undone here, and there is no delete for records, lists, notes or tasks. Remove those by hand in Attio.

query-particle-sql is not on every Attio plan, and Attio limits calls per workspace. Disconnecting stops future access; it does not undo a change that already ran.

Start free

Questions about connecting OpenClaw to Attio

Updated November 12, 2026.

How do I connect OpenClaw to Attio?

Sign in to ApexGenius and connect Attio. In OpenClaw, run openclaw mcp add apexgenius --url https://server.autom8.pro/mcp --transport streamable-http --auth oauth, then sign in from Settings, then MCP. Then ask OpenClaw: “Use whoami to show which Attio user and workspace are connected, then list the lists in my workspace. Do not change anything.” Start with a read, so nothing changes.

How do I check that OpenClaw can use Attio?

Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. If openclaw mcp status --verbose reports that authorization is required, sign in again from Settings, then MCP, or with openclaw mcp login apexgenius. Then ask: “Use whoami to show which Attio user and workspace are connected, then list the lists in my workspace. Do not change anything.”

What can my AI read in Attio?

People, companies, deals and custom records, lists and their entries, notes, tasks, comments, synced meetings, call recordings and emails, plus reports. It sees only what your Attio user can see.

Can my AI change records?

Yes. It can create and update records, list entries, notes and tasks, and merge records. Writes run immediately. Blocked hides a tool from agents.

Can it delete records?

No. Attio's MCP has no delete for records, lists, notes or tasks. The only delete is for a comment you created. Merges cannot be undone here.

Why did a SQL question fail?

query-particle-sql is not on every Attio plan. Ask the same question as a report instead; run-basic-report handles counts, sums and averages.

Connect Attio to OpenClaw today

Start free

1,000 free credits. No card required. Disconnect any time.