Skip to content

Connect OpenClaw to FreshBooks

Connect OpenClaw to FreshBooks: 1. Sign in to ApexGenius and connect FreshBooks. 2. Add the ApexGenius MCP server. 3. Start using FreshBooks in OpenClaw.

1,000 free credits · No card required

How to connect FreshBooks to OpenClaw

  1. 1Sign in to ApexGenius and connect FreshBooks
  2. 2Add the ApexGenius MCP server to OpenClaw
  3. 3Start using FreshBooks in OpenClaw
  1. 1ApexGenius

    Connect FreshBooks to ApexGenius

    FreshBooks connected

    FreshBooks shows as connected in ApexGenius, with what your AI can reach.

  2. 2ApexGenius

    Connect ApexGenius to OpenClaw

    Copy the MCP address

    On Start, pick API key, open Manual setup, and copy the MCP address.

  3. 3ApexGenius

     

    Approve access

    ApexGenius opens its approval page. Review the access, then approve.

Add the ApexGenius MCP server to OpenClaw

OpenClaw saves outbound MCP servers under mcp.servers in its config. Add one from the terminal, or in the Control UI under Settings, then MCP.

  1. Run the command. To use the Control UI instead, open Settings, then MCP, then Add server, choose Streamable HTTP, enter the address, and set auth to oauth in the config editor on that page.
  2. Sign in. In Settings, then MCP, choose Sign in for apexgenius and approve ApexGenius in your browser.
  3. From a terminal instead, stop the Gateway, run openclaw mcp login apexgenius, follow the printed authorization URL, then start the Gateway again.
Run in your terminal
openclaw mcp add apexgenius \
  --url https://server.autom8.pro/mcp \
  --transport streamable-http \
  --auth oauth

Check it. Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. Saving a server does not prove it answers.

Steps follow OpenClaw documentation, Connect MCP servers (opens in a new tab), read November 12, 2026.

Then ask OpenClaw

Which FreshBooks business is connected? List its five most recent invoices with client, amount and status. Do not change anything.

Start free
Written setup, step by stepShow

Before you start

  • An account with permission to use the FreshBooks resources you intend to connect.

1. Connect FreshBooks to ApexGenius

  1. Open FreshBooks in Connections. Choose Connect, or Add connection when offered. Give the connection a name if prompted. If Gateway setup pending appears, contact ApexGenius support before continuing.
  2. Choose the account and review access. Sign in to FreshBooks in the browser and allow access for ApexGenius. FreshBooks uses browser authorization; no API key is pasted into ApexGenius. ApexGenius asks for read scopes plus project and time-entry access.
  3. Review the connected account and resources. Find Allowed resources on the connection page. Each FreshBooks business your login keeps books for is listed. Turn on exactly one; every call goes to that business. A login with one business has it turned on already.
  4. Check the connection. Use Test connection or Check again and read the reported status. Add an AI agent from the AI agents page, choose Read only for the first test, and try the question below.
    The FreshBooks page in ApexGenius after you connect: the status control reads Connected, one account row shows when it was added and last checked, and the Tools, Agents and Skill rows follow.
    The FreshBooks page after you connect. The status control reads Connected; open it and choose Check again to confirm FreshBooks answers.Open full-size image (opens in a new tab)
Connect FreshBooks →

2. Connect ApexGenius to OpenClaw

Use this server address when adding the connection:

https://server.autom8.pro/mcp

The steps are above, under Add the ApexGenius MCP server to OpenClaw. These notes apply to OpenClaw only.

  • Set the transport. When transport is left out, OpenClaw uses SSE. ApexGenius serves Streamable HTTP, so keep --transport streamable-http.
  • Browser on another machine. If the browser cannot reach the callback, copy the code it returns and run openclaw mcp login apexgenius --code with that code.
  • If sign-in is needed again. openclaw mcp status --verbose shows whether a server needs authorization. Until it is signed in, OpenClaw leaves that one server out of the agent’s tools instead of failing the turn.
  • Reloading. openclaw mcp reload refreshes only the current CLI process. A Gateway running elsewhere needs its own reload or restart.
  • Access. When ApexGenius asks what OpenClaw may use, choose Read only for the first test, or Custom to limit it to the tools you need.

3. Verify one safe read

Which FreshBooks business is connected? List its five most recent invoices with client, amount and status. Do not change anything.

Which FreshBooks business is connected? List its five most recent invoices with client, amount and status. Do not change anything.

Compare the returned account and resource with FreshBooks. Check the connection status separately from the result of the first read.

Full guide: the FreshBooks setup guide.

What it looks like in OpenClaw

Illustration of a task, not a recorded customer result. Your answers come from the account and dates you choose.

How the route works
OpenClaw
OpenClawApexGenius MCP route
Which FreshBooks invoices are still unpaid, who owes them, and how much is due in total? Do not change anything.
ApexGenius
Working with ApexGenius1 tool search · 2 reads
RequestUnpaid invoices
Account scopeAuthorized connections checked
apex_search_toolsFreshBooks invoices · Find the FreshBooks read routeComplete
apex_call_read_toollist_invoices · List outstanding invoicesComplete
apex_call_read_toolget_client · Read the clients who oweComplete
OpenClaw

Illustrative example: six invoices are unpaid across four clients, and two are past due. The amounts are listed with their currency code. Nothing was changed.

Read-only route
OpenClaw

What to ask OpenClaw about FreshBooks

  • Unpaid invoices

    Which FreshBooks invoices are still unpaid, who owes them, and how much is due in total? Do not change anything.

    Runs list_invoices (read), then get_client (read).

  • Profit and loss

    Run my FreshBooks profit and loss report for last quarter, month by month. Do not change anything.

    Runs get_identity (read), then get_profit_and_loss_report (read).

  • Hours this week

    How many hours did I log in FreshBooks this week, by project? Do not change anything.

    Runs list_time_entries (read), then list_projects (read).

These 3 questions use 6 of FreshBooks’s 21 operations. The full list is below.

  • List last month's FreshBooks expenses and total them by category. Do not change anything. (read)
  • Log 2 hours to my website redesign project for today with the note "homepage review". Show me the entry first. (write)

What OpenClaw can do in FreshBooks

21 operations: 17 read, 4 write. Read looks things up and changes nothing. Writes change FreshBooks and run only when you turn them on.

Login and businesses

1 read
  • get_identityread

Clients and invoices

4 read
  • list_clientsread
  • get_clientread
  • list_invoicesread
  • get_invoiceread

Expenses and payments

4 read
  • list_expensesread
  • get_expenseread
  • list_paymentsread
  • get_paymentread

Reports

4 read
  • get_profit_and_loss_reportread
  • get_invoice_details_reportread
  • get_payments_collected_reportread
  • get_tax_summary_reportread

Projects

2 read · 2 write
  • list_projectsread
  • get_projectread
  • create_projectwrite
  • update_projectwrite

Time tracking

2 read · 2 write
  • list_time_entriesread
  • get_time_entryread
  • create_time_entrywrite
  • update_time_entrywrite

You choose the access. When you approve OpenClaw, pick Full access, Read only, or Custom.

One connection is one FreshBooks login. Every call goes to the one business that is turned on, and a call cannot name another.

Accounting is read only. The connector cannot create, send or change an invoice, record a payment, or delete anything.

The read route runs only reads. Creating and updating projects and time entries uses the write route.

Writes run immediately. Blocked hides a tool from agents.

A project or time entry made by mistake can be fixed with update_project or update_time_entry, or deleted by you in FreshBooks.

Start free

Questions about connecting OpenClaw to FreshBooks

Updated November 12, 2026.

How do I connect OpenClaw to FreshBooks?

Sign in to ApexGenius and connect FreshBooks. In OpenClaw, run openclaw mcp add apexgenius --url https://server.autom8.pro/mcp --transport streamable-http --auth oauth, then sign in from Settings, then MCP. Then ask OpenClaw: “Which FreshBooks business is connected? List its five most recent invoices with client, amount and status. Do not change anything.” Start with a read, so nothing changes.

How do I check that OpenClaw can use FreshBooks?

Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. If openclaw mcp status --verbose reports that authorization is required, sign in again from Settings, then MCP, or with openclaw mcp login apexgenius. Then ask: “Which FreshBooks business is connected? List its five most recent invoices with client, amount and status. Do not change anything.”

What can my AI read in FreshBooks?

Your login and its businesses, clients, invoices, expenses, payments, projects and time entries, and the profit and loss, tax summary, invoice details and payments collected reports. It reads only the one business you turned on.

Can my AI change anything in FreshBooks?

Only projects and time. It can create and update projects, and log and fix time entries. It cannot create, send or change an invoice, record a payment, or delete anything. Writes run immediately. Blocked hides a tool from agents.

Can I start with read-only access?

Yes. Choose Read only when you add your AI agent. It keeps every read and never sees the project and time-entry writes.

What if my login has more than one business?

Each business shows up as an account on the FreshBooks connection page. Turn on exactly one. Calls are refused until one is on, and they never reach a business that is off.

Connect FreshBooks to OpenClaw today

Start free

1,000 free credits. No card required. Disconnect any time.