Skip to content

Connect OpenClaw to Linear

Connect OpenClaw to Linear in 3 steps: 1. Sign in to ApexGenius and connect Linear. 2. Add the ApexGenius MCP server. 3. Start using Linear in OpenClaw.

1,000 free credits · No card required

How to connect Linear to OpenClaw

  1. 1Sign in to ApexGenius and connect Linear
  2. 2Add the ApexGenius MCP server to OpenClaw
  3. 3Start using Linear in OpenClaw
  1. 1Linear

    Connect Linear to ApexGenius

    Connect Linear

    Linear opens its own sign-in. Sign in and allow ApexGenius.

  2. 2ApexGenius

    Connect ApexGenius to OpenClaw

    Copy the MCP address

    On Start, pick API key, open Manual setup, and copy the MCP address.

  3. 3ApexGenius

     

    Approve access

    ApexGenius opens its approval page. Review the access, then approve.

Add the ApexGenius MCP server to OpenClaw

OpenClaw saves outbound MCP servers under mcp.servers in its config. Add one from the terminal, or in the Control UI under Settings, then MCP.

  1. Run the command. To use the Control UI instead, open Settings, then MCP, then Add server, choose Streamable HTTP, enter the address, and set auth to oauth in the config editor on that page.
  2. Sign in. In Settings, then MCP, choose Sign in for apexgenius and approve ApexGenius in your browser.
  3. From a terminal instead, stop the Gateway, run openclaw mcp login apexgenius, follow the printed authorization URL, then start the Gateway again.
Run in your terminal
openclaw mcp add apexgenius \
  --url https://server.autom8.pro/mcp \
  --transport streamable-http \
  --auth oauth

Check it. Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. Saving a server does not prove it answers.

Steps follow OpenClaw documentation, Connect MCP servers (opens in a new tab), read November 12, 2026.

Then ask OpenClaw

List my five most recently updated Linear issues. Read only; do not change anything.

Start free
Written setup, step by stepShow

Before you start

  • An account with permission to use the Linear resources you intend to connect.

1. Connect Linear to ApexGenius

  1. Open Linear in Connections. Choose Connect, or Add connection when offered. Give the connection a name if prompted. If Gateway setup pending appears, contact ApexGenius support before continuing.
  2. Choose the account and review access. Sign in to Linear in the browser, choose the workspace, and approve read and write access. Linear uses browser authorization; no API key is pasted into ApexGenius. Each workspace needs its own connection.
    The full Linear consent page, ApexGenius is requesting access, with red boxes around the details table and the Approve button.
    Linear names ApexGenius, its callback address and Read, Write access. Approve connects your workspace. Cancel stops without connecting.Open full-size image (opens in a new tab)
  3. Review the connected account and resources. Confirm the connected Linear workspace. Open Tools to review the issue, project, cycle and comment actions. Writes run right away, and Linear notifies subscribers.
  4. Check the connection. Use Test connection or Check again and read the reported status. Add an AI agent from the AI agents page, choose Read only for the first test, and try the question below.
Connect Linear →

2. Connect ApexGenius to OpenClaw

Use this server address when adding the connection:

https://server.autom8.pro/mcp

The steps are above, under Add the ApexGenius MCP server to OpenClaw. These notes apply to OpenClaw only.

  • Set the transport. When transport is left out, OpenClaw uses SSE. ApexGenius serves Streamable HTTP, so keep --transport streamable-http.
  • Browser on another machine. If the browser cannot reach the callback, copy the code it returns and run openclaw mcp login apexgenius --code with that code.
  • If sign-in is needed again. openclaw mcp status --verbose shows whether a server needs authorization. Until it is signed in, OpenClaw leaves that one server out of the agent’s tools instead of failing the turn.
  • Reloading. openclaw mcp reload refreshes only the current CLI process. A Gateway running elsewhere needs its own reload or restart.
  • Access. When ApexGenius asks what OpenClaw may use, choose Read only for the first test, or Custom to limit it to the tools you need.

3. Verify one safe read

List my five most recently updated Linear issues. Read only; do not change anything.

List my five most recently updated Linear issues. Read only; do not change anything.

Compare the returned account and resource with Linear. Check the connection status separately from the result of the first read.

Full guide: the Linear setup guide.

What it looks like in OpenClaw

Illustration of a task, not a recorded customer result. Your answers come from the account and dates you choose.

How the route works
OpenClaw
OpenClawApexGenius MCP route
List my five most recently updated Linear issues. Read only; do not change anything.
ApexGenius
Working with ApexGenius1 tool search · 1 read
RequestRecent issues
Account scopeAuthorized connections checked
apex_search_toolsLinear issues · Find the Linear read routeComplete
apex_call_read_toollist_issues · List recently updated issuesComplete
OpenClaw

Illustrative example: five issues changed in the last two days, each with its team, status and assignee. Compare the workspace with the one you connected. Nothing was changed.

Read-only route
OpenClaw

What to ask OpenClaw about Linear

  • Recent issues

    List my five most recently updated Linear issues. Read only; do not change anything.

    Runs list_issues (read).

  • Summarize a cycle

    Summarize what my team finished in the last completed cycle.

    Runs list_cycles (read), then list_issues (read).

  • Project status

    Read the latest status updates on the project I name and list the open risks.

    Runs list_projects (read), then get_status_updates (read).

These 3 questions use 4 of Linear’s 11 operations. The full list is below.

  • Create an issue in the team I name with this title and description. Show me the draft first. (write)

What OpenClaw can do in Linear

11 operations: 9 read, 2 write. Read looks things up and changes nothing. Writes change Linear and run only when you turn them on.

Issues

2 read · 1 write
  • list_issuesread
  • get_issueread
  • save_issuewrite

Projects

3 read
  • list_projectsread
  • get_projectread
  • get_status_updatesread

Cycles

1 read
  • list_cyclesread

Comments

1 read · 1 write
  • list_commentsread
  • save_commentwrite

Teams and people

2 read
  • list_teamsread
  • list_usersread

You choose the access. When you approve OpenClaw, pick Full access, Read only, or Custom.

One connection covers one Linear workspace. Connect again for another workspace.

Your Linear permissions set what the connection can reach. ApexGenius tool controls do not add Linear permissions.

The read route checks Linear’s live read-only label and rejects writes.

Writes run immediately. Blocked hides a tool from agents.

ApexGenius cannot undo a Linear change. Disconnecting stops future gateway access; it does not reverse an issue, update or comment that already ran.

Start free

Questions about connecting OpenClaw to Linear

Updated November 12, 2026.

How do I connect OpenClaw to Linear?

Connect OpenClaw to Linear through ApexGenius in three steps. Sign in to ApexGenius and connect Linear by signing in to Linear in the browser and picking the workspace. In OpenClaw, run openclaw mcp add apexgenius --url https://server.autom8.pro/mcp --transport streamable-http --auth oauth, then sign in from Settings, then MCP. Then open a task in OpenClaw and ask a question about your Linear. Start with a read, so nothing changes.

How do I check that OpenClaw can use Linear?

Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. If openclaw mcp status --verbose reports that authorization is required, sign in again from Settings, then MCP, or with openclaw mcp login apexgenius. Then ask: “List my five most recently updated Linear issues. Read only; do not change anything.”

Is there a Linear MCP server for OpenClaw?

Yes. ApexGenius is an MCP server that OpenClaw connects to once. It carries your Linear connection and 11 Linear operations, so OpenClaw does not need a separate Linear integration or plugin. You set it up one time and add each agent the same way.

What can OpenClaw do in Linear once it is connected?

OpenClaw can run 11 Linear operations through ApexGenius: 9 reads that find issues and read projects, status updates, cycles, comments, teams and people, and 2 writes that save issues and comments once you turn writes on. Linear permissions still apply.

Can OpenClaw read my Linear workspace?

One workspace per connection, the one you pick when you sign in to Linear in the browser. Your Linear permissions set what OpenClaw can reach, and ApexGenius adds none. Connect again to add another workspace. No Linear API key is pasted into ApexGenius.

Can OpenClaw change my Linear?

Not until you allow writes. Choose Read only and reads go through a route that checks Linear’s read-only label. With writes on, OpenClaw can create and update issues and add comments, and Linear notifies subscribers. ApexGenius cannot undo a Linear change.

Can I use the same Linear connection with Claude, ChatGPT, Grok Bot or Muse?

Yes. One Linear connection in ApexGenius works with every compatible agent you add, including Claude, ChatGPT, Grok Bot or Muse. Each agent gets its own access choice and its own short setup, so you can pick read only for one agent and more for another.

Connect Linear to OpenClaw today

Start free

1,000 free credits. No card required. Disconnect any time.