Skip to content

Connect OpenClaw to Outlook Calendar

Connect OpenClaw to Outlook Calendar: 1. Connect Outlook Calendar in ApexGenius. 2. Add the ApexGenius MCP server. 3. Start using Outlook Calendar in OpenClaw.

1,000 free credits · No card required

How to connect Outlook Calendar to OpenClaw

  1. 1Sign in to ApexGenius and connect Outlook Calendar
  2. 2Add the ApexGenius MCP server to OpenClaw
  3. 3Start using Outlook Calendar in OpenClaw
  1. 1ApexGenius

    Connect ApexGenius to OpenClaw

    Copy the MCP address

    On Start, pick API key, open Manual setup, and copy the MCP address.

  2. 2ApexGenius

     

    Approve access

    ApexGenius opens its approval page. Review the access, then approve.

Add the ApexGenius MCP server to OpenClaw

OpenClaw saves outbound MCP servers under mcp.servers in its config. Add one from the terminal, or in the Control UI under Settings, then MCP.

  1. Run the command. To use the Control UI instead, open Settings, then MCP, then Add server, choose Streamable HTTP, enter the address, and set auth to oauth in the config editor on that page.
  2. Sign in. In Settings, then MCP, choose Sign in for apexgenius and approve ApexGenius in your browser.
  3. From a terminal instead, stop the Gateway, run openclaw mcp login apexgenius, follow the printed authorization URL, then start the Gateway again.
Run in your terminal
openclaw mcp add apexgenius \
  --url https://server.autom8.pro/mcp \
  --transport streamable-http \
  --auth oauth

Check it. Run openclaw mcp doctor apexgenius --probe. It checks the connection and lists available tools.

Steps follow OpenClaw documentation, Connect MCP servers (opens in a new tab), read November 12, 2026.

Then ask OpenClaw

What is on my Outlook calendar tomorrow? Do not create anything.

Start free
Written setup, step by stepShow

Before you start

  • An account with permission to use the Outlook Calendar resources you intend to connect.

1. Connect Outlook Calendar to ApexGenius

  1. Open Outlook Calendar in Connections. Choose Connect, or Add connection when offered. Give the connection a name if prompted. If Gateway setup pending appears, contact ApexGenius support before continuing.
  2. Choose the account and review access. Sign in with your Microsoft work, school or personal account and review the access Microsoft lists: your calendars, and staying signed in. Microsoft describes the calendar access as full access because creating an event needs it; ApexGenius only reads events and creates new ones. No API key is pasted into ApexGenius. If Microsoft says an admin must approve, ask your Microsoft 365 admin.
  3. Review the connected account and resources. Confirm the connected account on the connection page. Open Tools to review the reads and the create tool. Creating an event runs right away when enabled, and Microsoft invites every attendee.
  4. Check the connection. Use Test connection or Check again and read the reported status. Add an AI agent from the AI agents page, choose Read only for the first test, and try the question below.
Connect Outlook Calendar →

2. Connect ApexGenius to OpenClaw

Use this server address when adding the connection:

https://server.autom8.pro/mcp

The steps are above, under Add the ApexGenius MCP server to OpenClaw. These notes apply to OpenClaw only.

  • Set the transport. When transport is left out, OpenClaw uses SSE. ApexGenius serves Streamable HTTP, so keep --transport streamable-http.
  • Browser on another machine. If the browser cannot reach the callback, copy the code it returns and run openclaw mcp login apexgenius --code with that code.
  • If sign-in is needed again. openclaw mcp status --verbose shows whether a server needs authorization. Until it is signed in, OpenClaw leaves that one server out of the agent’s tools instead of failing the turn.
  • Reloading. openclaw mcp reload refreshes only the current CLI process. A Gateway running elsewhere needs its own reload or restart.
  • Access. When ApexGenius asks what OpenClaw may use, choose Read only for the first test, or Custom to limit it to the tools you need.

3. Try your first question

What is on my Outlook calendar tomorrow? Do not create anything.

What is on my Outlook calendar tomorrow? Do not create anything.

Check that the answer matches what you see in Outlook Calendar.

Full guide: the Outlook Calendar setup guide.

What it looks like in OpenClaw

Example workflow
OpenClaw
OpenClawApexGenius MCP route
What is on my Outlook calendar tomorrow? Do not create anything.
ApexGenius
Working with ApexGenius1 tool search · 2 reads
RequestTomorrow
Account scopeAuthorized connections checked
apex_search_toolsOutlook calendar · Find the Outlook Calendar read routeComplete
apex_call_read_toolget_me · Check the connected accountComplete
apex_call_read_toollist_calendar_view · List the events for tomorrowComplete
OpenClaw

Four events tomorrow, starting with a stand-up at 9 and ending with a client call at 3. Nothing was created.

Read-only route
OpenClaw

What to ask OpenClaw about Outlook Calendar

  • Tomorrow

    What is on my Outlook calendar tomorrow? Do not create anything.

    Runs get_me (read), then list_calendar_view (read).

  • Free time

    When am I free for an hour this week, between 9 and 5? Do not create anything.

    Runs get_me (read), then list_calendar_view (read).

  • Next meeting

    Who is invited to my next meeting, and where is it? Do not create anything.

    Runs list_calendar_view (read), then get_event (read).

These 3 questions use 3 of Outlook Calendar’s 5 operations. The full list is below.

  • Book 30 minutes on my Outlook calendar with the person I name on Thursday afternoon. Show me the title, time and attendees first, and create it only after I say yes. (write)

What OpenClaw can do in Outlook Calendar

5 operations: 4 read, 1 write. Read looks things up and changes nothing. Writes change Outlook Calendar and run only when you turn them on.

Account

1 read
  • get_meread

Read the calendar

3 read
  • list_calendar_viewread
  • list_eventsread
  • get_eventread

Create

1 write
  • create_eventwrite

You choose the access. When you approve OpenClaw, pick Full access, Read only, or Custom.

One connection is one Microsoft account and its own calendar. Shared or delegated calendars and other people's calendars are not included.

Nothing changes, cancels or deletes an event, and nothing answers an invitation. Attachments are not included.

Microsoft describes the calendar access as full access, because creating an event needs it. ApexGenius only reads events and creates new ones.

The read route runs only reads. Creating an event uses the write route.

Writes run immediately. Blocked hides a tool from agents.

A new event invites its attendees right away. You cancel it yourself in Outlook, which tells them.

Start free

Questions about connecting OpenClaw to Outlook Calendar

Updated November 16, 2026.

How do I connect OpenClaw to Outlook Calendar?

Connect OpenClaw to Outlook Calendar through ApexGenius in three steps. Sign in to ApexGenius and connect Outlook Calendar by signing in with the Microsoft account that owns your calendar. In OpenClaw, run openclaw mcp add apexgenius --url https://server.autom8.pro/mcp --transport streamable-http --auth oauth, then sign in from Settings, then MCP. Then open a task in OpenClaw and ask what is on your calendar. Start with a read, so nothing is created.

How do I check that OpenClaw can use Outlook Calendar?

Run openclaw mcp doctor apexgenius --probe. It opens a live connection and lists what the server offers. If openclaw mcp status --verbose reports that authorization is required, sign in again from Settings, then MCP, or with openclaw mcp login apexgenius. Then ask: “What is on my Outlook calendar tomorrow? Do not create anything.”

Is there an Outlook Calendar MCP server for OpenClaw?

Yes. ApexGenius is an MCP server that OpenClaw connects to once. It carries your Outlook Calendar connection and 5 calendar operations, so OpenClaw does not need a separate calendar integration or plugin. You set it up one time and add each agent the same way.

What can OpenClaw do on my Outlook calendar once it is connected?

OpenClaw can run 5 Outlook Calendar operations through ApexGenius: 4 reads that check the signed-in account, list the events in a date range, list your events and read one event, plus one operation that creates a new event on your calendar.

Can OpenClaw see my Outlook calendar?

Yes, your own calendar on the one account you connect. Choose Read only and OpenClaw can read your events and nothing else. It cannot see shared calendars or other people's calendars.

Can OpenClaw book meetings on my Outlook calendar?

Not until you allow writes. Choose Read only and it cannot create anything. With writes on, OpenClaw can create a new event, and Microsoft invites every attendee right away, which cannot be recalled. It cannot change or cancel an event.

Can I use the same Outlook Calendar connection with Claude, ChatGPT, Grok Bot or Muse?

Yes. One Outlook Calendar connection in ApexGenius works with every compatible agent you add, including Claude, ChatGPT, Grok Bot or Muse. Each agent gets its own access choice and its own short setup, so you can pick read only for one agent and more for another.

Connect Outlook Calendar to OpenClaw today

Start free

1,000 free credits. No card required. Disconnect any time.