Connect Cursor to Outlook Calendar
Connect Cursor to Outlook Calendar: 1. Connect Outlook Calendar in ApexGenius. 2. Add the ApexGenius MCP server. 3. Start using Outlook Calendar in Cursor.
1,000 free credits · No card required
How to connect Outlook Calendar to Cursor
- 1Sign in to ApexGenius and connect Outlook Calendar
- 2Add the ApexGenius MCP server to Cursor
- 3Start using Outlook Calendar in Cursor
- 1
Connect ApexGenius to Cursor
Choose Cursor
Back on Start, pick Cursor and copy the prompt.
- 2
Approve access
ApexGenius opens its approval page. Review the access, then approve.
Add the ApexGenius MCP server to Cursor
Cursor reads MCP servers from ~/.cursor/mcp.json for every project, or from .cursor/mcp.json inside one project. The Customize page manages the same servers.
- Add the apexgenius entry to
mcpServers. Keep any servers already there. - Open Customize in Cursor, find apexgenius and choose Connect.
- Approve ApexGenius in your browser.
{
"mcpServers": {
"apexgenius": {
"url": "https://server.autom8.pro/mcp"
}
}
}Check it. Cursor lists a connected server’s tools under Available Tools. By default it asks for your approval before it runs one.
Steps follow Cursor documentation, Model Context Protocol (MCP) (opens in a new tab), read November 12, 2026.
Then ask Cursor
What is on my Outlook calendar tomorrow? Do not create anything.
Written setup, step by stepShow
Before you start
- An account with permission to use the Outlook Calendar resources you intend to connect.
1. Connect Outlook Calendar to ApexGenius
- Open Outlook Calendar in Connections. Choose Connect, or Add connection when offered. Give the connection a name if prompted. If Gateway setup pending appears, contact ApexGenius support before continuing.
- Choose the account and review access. Sign in with your Microsoft work, school or personal account and review the access Microsoft lists: your calendars, and staying signed in. Microsoft describes the calendar access as full access because creating an event needs it; ApexGenius only reads events and creates new ones. No API key is pasted into ApexGenius. If Microsoft says an admin must approve, ask your Microsoft 365 admin.
- Review the connected account and resources. Confirm the connected account on the connection page. Open Tools to review the reads and the create tool. Creating an event runs right away when enabled, and Microsoft invites every attendee.
- Check the connection. Use Test connection or Check again and read the reported status. Add an AI agent from the AI agents page, choose Read only for the first test, and try the question below.
2. Connect ApexGenius to Cursor
Use this server address when adding the connection:
https://server.autom8.pro/mcpThe steps are above, under Add the ApexGenius MCP server to Cursor. These notes apply to Cursor only.
- No client ID or secret. Cursor signs in with OAuth and registers itself with ApexGenius, so
mcp.jsonneeds only the address. - Enterprise teams. An MCP allowlist can limit which server addresses run. If apexgenius does not connect on a team account, ask your Cursor admin to allow the ApexGenius address.
- Turning it off. Enable or disable the server from Customize in the sidebar.
- Access. When ApexGenius asks what Cursor may use, choose Read only for the first test, or Custom to limit it to the tools you need.
3. Try your first question
What is on my Outlook calendar tomorrow? Do not create anything.
What is on my Outlook calendar tomorrow? Do not create anything.Check that the answer matches what you see in Outlook Calendar.
Full guide: the Outlook Calendar setup guide.
What it looks like in Cursor
apex_search_toolsOutlook calendar · Find the Outlook Calendar read routeCompleteapex_call_read_toolget_me · Check the connected accountCompleteapex_call_read_toollist_calendar_view · List the events for tomorrowCompleteFour events tomorrow, starting with a stand-up at 9 and ending with a client call at 3. Nothing was created.
Read-only routeWhat to ask Cursor about Outlook Calendar
- Tomorrow
What is on my Outlook calendar tomorrow? Do not create anything.
Runs
get_me(read), thenlist_calendar_view(read). - Free time
When am I free for an hour this week, between 9 and 5? Do not create anything.
Runs
get_me(read), thenlist_calendar_view(read). - Next meeting
Who is invited to my next meeting, and where is it? Do not create anything.
Runs
list_calendar_view(read), thenget_event(read).
These 3 questions use 3 of Outlook Calendar’s 5 operations. The full list is below.
- Book 30 minutes on my Outlook calendar with the person I name on Thursday afternoon. Show me the title, time and attendees first, and create it only after I say yes. (write)
What Cursor can do in Outlook Calendar
5 operations: 4 read, 1 write. Read looks things up and changes nothing. Writes change Outlook Calendar and run only when you turn them on.
Account
1 readget_mereadRead the signed-in Microsoft account: its name and mail address.
Read the calendar
3 readlist_calendar_viewreadList the events between two dates and times, with each repeat of a repeating event.
list_eventsreadList events without a date range. A repeating event shows once, as the series.
get_eventreadRead one event: its time, place, organizer and attendees.
Create
1 writecreate_eventwriteCreate an event on your calendar. Microsoft invites every attendee right away, and that cannot be recalled.
You choose the access. When you approve Cursor, pick Full access, Read only, or Custom.
One connection is one Microsoft account and its own calendar. Shared or delegated calendars and other people's calendars are not included.
Nothing changes, cancels or deletes an event, and nothing answers an invitation. Attachments are not included.
Microsoft describes the calendar access as full access, because creating an event needs it. ApexGenius only reads events and creates new ones.
The read route runs only reads. Creating an event uses the write route.
Writes run immediately. Blocked hides a tool from agents.
A new event invites its attendees right away. You cancel it yourself in Outlook, which tells them.
Questions about connecting Cursor to Outlook Calendar
Updated November 16, 2026.
How do I connect Cursor to Outlook Calendar?
Connect Cursor to Outlook Calendar through ApexGenius in three steps. Sign in to ApexGenius and connect Outlook Calendar by signing in with the Microsoft account that owns your calendar. In Cursor, add an apexgenius entry with the ApexGenius MCP address to mcpServers in ~/.cursor/mcp.json, then choose Connect on the Customize page. Then open a task in Cursor and ask what is on your calendar. Start with a read, so nothing is created.
How do I check that Cursor can use Outlook Calendar?
Open Customize in Cursor and find apexgenius among the MCP servers. Its tools should appear under Available Tools. If it is listed but not connected, choose Connect and finish the browser sign-in. On an Enterprise team, the MCP allowlist may need the ApexGenius address. Then ask: “What is on my Outlook calendar tomorrow? Do not create anything.”
Is there an Outlook Calendar MCP server for Cursor?
Yes. ApexGenius is an MCP server that Cursor connects to once. It carries your Outlook Calendar connection and 5 calendar operations, so Cursor does not need a separate calendar integration or plugin. You set it up one time and add each agent the same way.
What can Cursor do on my Outlook calendar once it is connected?
Cursor can run 5 Outlook Calendar operations through ApexGenius: 4 reads that check the signed-in account, list the events in a date range, list your events and read one event, plus one operation that creates a new event on your calendar.
Can Cursor see my Outlook calendar?
Yes, your own calendar on the one account you connect. Choose Read only and Cursor can read your events and nothing else. It cannot see shared calendars or other people's calendars.
Can Cursor book meetings on my Outlook calendar?
Not until you allow writes. Choose Read only and it cannot create anything. With writes on, Cursor can create a new event, and Microsoft invites every attendee right away, which cannot be recalled. It cannot change or cancel an event.
Can I use the same Outlook Calendar connection with Claude, ChatGPT, Grok Bot or Muse?
Yes. One Outlook Calendar connection in ApexGenius works with every compatible agent you add, including Claude, ChatGPT, Grok Bot or Muse. Each agent gets its own access choice and its own short setup, so you can pick read only for one agent and more for another.
More connections like this one
Cursor with other apps
All 50 apps Cursor can use
Google Tasks
Google Calendar
Google Sheets
Calendly
ClickUp
monday.com
ElevenLabs
FreshBooks
Trello
GitLab
Mobbin
SlackDiscord
ChatGPT Ads
Context.dev
Attio
Semrush
Notion
Apify
Google Ads
Google Analytics
Google Meet
Gmail
Google Chat
Google Docs
Google Drive
Google Slides
Apollo
Blotato
Bing Webmaster
Atlassian Rovo
Polymarket
OP.GGYouTube
YouTube Analytics
Salesforce
n8n
Confluence
Google Search Console
TypeSafeHubSpot
Microsoft Outlook
Connect Outlook Calendar to Cursor today
Start free1,000 free credits. No card required. Disconnect any time.