Skip to content

Connect Cursor to n8n

Connect Cursor to n8n in 3 steps: 1. Sign in to ApexGenius and connect n8n. 2. Add the ApexGenius MCP server. 3. Start using n8n in Cursor.

1,000 free credits · No card required

How to connect n8n to Cursor

  1. 1Sign in to ApexGenius and connect n8n
  2. 2Add the ApexGenius MCP server to Cursor
  3. 3Start using n8n in Cursor
  1. 1ApexGenius

    Connect n8n to ApexGenius

    n8n connected

    n8n shows as connected in ApexGenius, with what your AI can reach.

  2. 2ApexGenius

    Connect ApexGenius to Cursor

    Choose Cursor

    Back on Start, pick Cursor and copy the prompt.

  3. 3ApexGenius

     

    Approve access

    ApexGenius opens its approval page. Review the access, then approve.

Add the ApexGenius MCP server to Cursor

Cursor reads MCP servers from ~/.cursor/mcp.json for every project, or from .cursor/mcp.json inside one project. The Customize page manages the same servers.

  1. Add the apexgenius entry to mcpServers. Keep any servers already there.
  2. Open Customize in Cursor, find apexgenius and choose Connect.
  3. Approve ApexGenius in your browser.
Add to ~/.cursor/mcp.json
{
  "mcpServers": {
    "apexgenius": {
      "url": "https://server.autom8.pro/mcp"
    }
  }
}

Check it. Cursor lists a connected server’s tools under Available Tools. By default it asks for your approval before it runs one.

Steps follow Cursor documentation, Model Context Protocol (MCP) (opens in a new tab), read November 12, 2026.

Then ask Cursor

List up to five n8n workflows. Do not run or change any workflow.

Start free
Written setup, step by stepShow

Before you start

  • A reachable n8n instance and an API key for that instance.

1. Connect n8n to ApexGenius

  1. Open n8n in Connections. Sign in to ApexGenius, open Connections, choose n8n, and select Connect.
  2. Enter the instance credentials. Provide the n8n instance URL and API key in the connection form. Save the connection after validation succeeds.
  3. Check the available tools. Open the Tools tab and use the Read filter to review the available inspection tools before using workflow authoring or execution actions.
  4. Check the saved connection. Use Test connection and read the reported status before asking your AI to list workflows.
    The n8n page in ApexGenius after you connect: the status control reads Connected, one account row shows when it was added and last checked, and the Tools, Agents and Skill rows follow.
    The n8n page after you connect. The status control reads Connected and the account row shows when it was last checked. Open the status control for Check again.Open full-size image (opens in a new tab)
Connect n8n →

2. Connect ApexGenius to Cursor

Use this server address when adding the connection:

https://server.autom8.pro/mcp

The steps are above, under Add the ApexGenius MCP server to Cursor. These notes apply to Cursor only.

  • No client ID or secret. Cursor signs in with OAuth and registers itself with ApexGenius, so mcp.json needs only the address.
  • Enterprise teams. An MCP allowlist can limit which server addresses run. If apexgenius does not connect on a team account, ask your Cursor admin to allow the ApexGenius address.
  • Turning it off. Enable or disable the server from Customize in the sidebar.
  • Access. When ApexGenius asks what Cursor may use, choose Read only for the first test, or Custom to limit it to the tools you need.

3. Verify one safe read

List up to five n8n workflows. Do not run or change any workflow.

List up to five n8n workflows. Do not run or change any workflow.

Compare the workflow names and active status with the same n8n instance. A test execution can trigger downstream actions, so begin with a list request.

Full guide: the n8n setup guide.

What it looks like in Cursor

Illustration of a task, not a recorded customer result. Your answers come from the account and dates you choose.

How the route works
Cursor
CursorApexGenius MCP route
Which n8n workflows are turned on right now?
ApexGenius
Working with ApexGenius1 tool search · 2 reads
RequestActive workflows
Account scopeAuthorized connections checked
apex_search_toolsn8n workflows · Find the n8n read pathComplete
n8napex_call_read_tooln8n_list_workflows · List active workflowsComplete
n8napex_call_read_tooln8n_get_workflow · Read each triggerComplete
Cursor

Nine workflows are active. Four run on a schedule, five on webhooks. The newest is the lead intake workflow, changed two days ago. Nothing was changed.

Read-only route
Cursor

What to ask Cursor about n8n

  • Active workflows

    Which n8n workflows are turned on right now?

    Runs n8n_list_workflows (read), then n8n_get_workflow (read).

  • Failed runs

    Which workflows failed in the last 24 hours and why?

  • Lead path

    Show me every workflow that touches new leads.

    Runs n8n_list_workflows (read), then n8n_get_workflow (read).

These 3 questions use 2 of n8n’s 20 operations. The full list is below.

  • Audit my workflows for broken nodes and missing credentials. (read)
  • Find a template for routing form submissions into Salesforce. (read)
  • Show the last failed executions and explain the common cause. (read)
  • Update the webhook node on the intake workflow. (write)

What Cursor can do in n8n

20 operations: 9 read, 11 write. Read looks things up and changes nothing. Writes change n8n and run only when you turn them on.

Workflows and executions

3 read · 1 write
  • n8n_list_workflowsread
  • n8n_get_workflowread
  • n8n_executionswrite
  • n8n_audit_instanceread

Nodes and templates

5 read
  • n8n_search_nodesread
  • n8n_get_noderead
  • n8n_validate_noderead
  • n8n_search_templatesread
  • n8n_get_templateread

Build and validate

1 read · 3 write
  • n8n_validate_workflowread
  • n8n_create_workflowwrite
  • n8n_generate_workflowwrite
  • n8n_deploy_templatewrite

Change, run, and recover

7 write
  • n8n_update_workflowwrite
  • n8n_replace_workflowwrite
  • n8n_autofix_workflowwrite
  • n8n_test_workflowwrite
  • n8n_workflow_versionswrite
  • n8n_manage_datatablewrite
  • n8n_delete_workflowwrite

You choose the access. When you approve Cursor, pick Full access, Read only, or Custom.

The connection belongs to the user and is not tied to a Salesforce connection.

Read, write, destructive, and open-world tool hints come from the current gateway catalog.

A test run can trigger real downstream actions such as email or third-party API calls.

Writes run immediately. Blocked hides a tool from agents.

Start free

Questions about connecting Cursor to n8n

Updated November 12, 2026.

How do I connect Cursor to n8n?

Connect Cursor to n8n through ApexGenius in three steps. Sign in to ApexGenius and connect n8n with your n8n instance URL and an API key. In Cursor, add an apexgenius entry with the ApexGenius MCP address to mcpServers in ~/.cursor/mcp.json, then choose Connect on the Customize page. Then open a task in Cursor and ask a question about your n8n. Start with a read, so nothing changes.

How do I check that Cursor can use n8n?

Open Customize in Cursor and find apexgenius among the MCP servers. Its tools should appear under Available Tools. If it is listed but not connected, choose Connect and finish the browser sign-in. On an Enterprise team, the MCP allowlist may need the ApexGenius address. Then ask: “List up to five n8n workflows. Do not run or change any workflow.”

Is there a n8n MCP server for Cursor?

Yes. ApexGenius is an MCP server that Cursor connects to once. It carries your n8n connection and 20 n8n operations, so Cursor does not need a separate n8n integration or plugin. You set it up one time and add each agent the same way.

What can Cursor do in n8n once it is connected?

Cursor can run 20 n8n operations through ApexGenius: 9 reads that list workflows, inspect them and their nodes, search templates, and validate and audit the instance, and 11 writes that create, generate, deploy, update, run and delete workflows and manage execution records and data tables.

Can Cursor read my n8n workflows?

Yes, on the n8n instance you connect with its URL and an API key. Self-hosted or cloud both work if the instance is reachable and the key is valid. The connected n8n account decides what Cursor can reach. ApexGenius stores the credential, so it is not left in an agent config.

Can Cursor change my n8n?

Not until you enable those tools. Read tools return workflow detail and change nothing. Tools that overwrite or remove are marked destructive and run when enabled. A test run can trigger real downstream actions such as email or API calls, so start with a list request.

Can I use the same n8n connection with Claude, ChatGPT, Grok Bot or Muse?

Yes. One n8n connection in ApexGenius works with every compatible agent you add, including Claude, ChatGPT, Grok Bot or Muse. Each agent gets its own access choice and its own short setup, so you can pick read only for one agent and more for another.

Connect n8n to Cursor today

Start free

1,000 free credits. No card required. Disconnect any time.